Leak KNX basic
Leakage Sensor for Water/Pipe Break Detection
Water sensor, water alarm, water detector, pipe breakage detector for KNX
The Leakage sensor Leak KNX basic for the KNX building bus system recognizes water, e.g. in case of a pipe breakage. If there is water between the electrodes of the probe, an alarm message will be sent to the KNX bus.
- Detection of water on the probe
- Alarm signal sent to the KNX bus with a text message
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS 5
| Material | Casing / electrodes: stainless steel A2 |
| Installation | for placing on the floor |
| Degree of protection | IP 68 |
| Electrode chemical resistance | Water |
| Dimensions | Diameter: approx. 77 mm Height: approx. 33 mm |
| Cable length | approx. 140 mm (plus cable grip and plugs) |
| Ambient temperature | Operation -25…+85 °C, storage -40…+125°C |
| Weight | approx. 210 g (without junction box) |
| Operating voltage | bus voltage |
| Power on the bus | 30 mA |
| Data output | KNX +/- Bus connector terminal |
| Communication objects | 54 |
- Probe with cable
- Stainless steel A2 plumbing screw 4.5 x 70 (DIN 7995), matching dowel SX6 x 30
- Surface-mounted junction box (IP 55)
- Magnet for teaching procedure (telescopic rod)
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70315
Languages:
RTF
Item No.: 70315, 70316
Languages:
The Leakage sensor Leak KNX basic for the KNX building bus system recognizes water, e.g. in case of a pipe breakage. If there is water between the electrodes of the probe, an alarm message will be sent to the KNX bus.
- Detection of water on the probe
- Alarm signal sent to the KNX bus with a text message
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS 5
| Material | Casing / electrodes: stainless steel A2 |
| Installation | for placing on the floor |
| Degree of protection | IP 68 |
| Electrode chemical resistance | Water |
| Dimensions | Diameter: approx. 77 mm Height: approx. 33 mm |
| Cable length | approx. 140 mm (plus cable grip and plugs) |
| Ambient temperature | Operation -25…+85 °C, storage -40…+125°C |
| Weight | approx. 210 g (without junction box) |
| Operating voltage | bus voltage |
| Power on the bus | 30 mA |
| Data output | KNX +/- Bus connector terminal |
| Communication objects | 54 |
- Probe with cable
- Stainless steel A2 plumbing screw 4.5 x 70 (DIN 7995), matching dowel SX6 x 30
- Surface-mounted junction box (IP 55)
- Magnet for teaching procedure (telescopic rod)
- Data sheet with installation instruction (German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Filter by language:
ZIP
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
Item No.: 70315
Languages:
RTF
Item No.: 70315, 70316
Languages: