Home  >  Products/Store  >  KNX Products  >  KNX Weather Stations and Weather Sensors  >  P04-KNX-GPS

P04-KNX-GPS

Weather Station

 

  • Weather sensor/combined sensor: sun sensor, electronic wind sensor, rain sensor, thermometer, GPS receiver
  • Slim design, unobtrusive on the façade

 

The Weather Station P04-KNX-GPS for the KNX building bus system measures temperature, wind speed and brightness. It recognises precipitation and receives the GPS signal for time and location.

The compact housing of the P04-KNX-GPS accommodates the sensors, evaluation circuits and bus-coupling electronics.


P04-KNX-GPS
  • Weather Station with Mounting Arm Fix (included in delivery) Weather Station with Mounting Arm Fix (included in delivery)
  • Weather Station with Mounting Arm Fix (included in delivery) Weather Station with Mounting Arm Fix (included in delivery)
  • Example for pole mounting Example for pole mounting
  • Brightness measurement
  • GPS receiver, outputting the current time and location coordinates
  • Wind measurement: The wind strength is measured electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and rising winds in the vicinity of the device are recorded
  • Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
  • Temperature measurement
  • Configuration is made using the KNX software ETS

Wheater Station:
HousingPlastic
ColourWhite / Translucent
AssemblySurface mount
Protection categoryIP 44
Dimensionsapprox. 62 × 75 × 155 (W × H × D, mm)
Connection cable4-wire (bus +/-, auxiliary voltage +/-),
diameter approx. 5 mm
WeightWeather station with mounting approx. 90 g,
total weight with accessories approx. 280 g
Ambient temperatureOperation -30…+50°C, storage -30…+70°C
Auxiliary supply20...32 V DC.
An appropriate power supply unit can be purchased from Elsner Elektronik.
Auxiliary current at 24V DC: max. 90 mA
Bus currentmax. 10 mA
Data outputKNX +/-
Communication objects28
Measurement range temperature sensor-30°C … +50°C
Measurement range wind sensor:0 m/s … 35 m/s
Measurement range brightness sensor0 lux … 150,000 lux

Mounting arm Fix:
Colourpowder-coated white RAL 9003
Total lenghtapprox. 430 mm
Weightapprox. 190 gWheater Station:
HousingPlastic
ColourWhite / Translucent
AssemblySurface mount
Protection categoryIP 44
Dimensionsapprox. 62 × 75 × 155 (W × H × D, mm)
Connection cable4-wire (bus +/-, auxiliary voltage +/-),
diameter approx. 5 mm
WeightWeather station with mounting approx. 90 g,
total weight with accessories approx. 280 g
Ambient temperatureOperation -30…+50°C, storage -30…+70°C
Auxiliary supply20...32 V DC.
An appropriate power supply unit can be purchased from Elsner Elektronik.
Auxiliary current at 24V DC: max. 90 mA
Bus currentmax. 10 mA
Data outputKNX +/-
Communication objects28
Measurement range Temperature sensor-30°C … +50°C
Measurement range Wind sensor0 m/s … 35 m/s
Measurement range Brightness sensor0 lux … 150,000 lux
Resolution1 lux up to 300 lux
2 lux up to 1000 lux
25 lux up to 150.000 lux
Accuracy±15% of the measurement value at 30 lux …30,000 lux

Mounting arm Fix:
Colourpowder-coated white RAL 9003
Total lenghtapprox. 430 mm
Weightapprox. 190 g