IP KNX Interface

for IP Cameras

The IP KNX interface serves to transmit data between the Mobotix IP cameras and the KNX bus system. For this purpose, the KNX telegrams are converted into the Ethernet protocols and sent to the LAN in which the cameras are installed (and vice versa).


  • IP KNX Interface IP KNX Interface
  • Communication with 8 IP cameras with 8 input and 8 output objects each
  • Transfer of the camera events to the KNX bus
  • Controlling the camera via the KNX bus
  • KNX Bus Terminal and Ethernet / IP Connection (POE)
  • Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
  • Configuration via ETS 5
HousingPlastic
Colour White
Assembly Series installation on a mounting rail
Protection category IP 20
Dimensions approx. 53 x 88 x 60 (W x H x D, mm), 3 modules
Weight approx. 110 g
Ambient temperature Operation at 0...+65°C, storage at -40...+70°C
Ambient humidity max. 90% RH, avoid condensation
Operating voltage • POE (Power Over Ethernet), IEEE 802.3af, Category 1
• KNX bus voltage
Power on bus: 10 mA
Ethernet/IP connection LAN jack RJ45
KNX bus connection KNX +/- bus connector terminal
Communication objects 897