Cala Touch KNX T CH
Room Controller with Temperature Sensor
KNX touch controller with sensor and control functions
Highlights
-
-
Colour touch display with display and operating pages
-
-
Human Centric Lighting, colour temperature and RGB light control
-
-
Light Switching or dimming
- - Operation of drives (shading, windows)
The Cala Touch KNX T CH room controller for the KNX bus system measures the room temperature. Via the bus, the indoor sensor can receive an external value and process it with its own data to form an overall value (mixed value, e.g. room average). The measured value can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates. Multifunction modules change input data as required by calculations, querying a condition or converting the data point type. In addition, an integrated actuating value comparator can compare and output values received via communication objects. and output them. Integrated PI controllers control a heating/cooling (according to temperature). Cala Touch KNX T CH has a touch display on which different display and operating pages are shown depending on the individual configuration. A page with display of the current measured values, a menu area for setting the unit and pages with touch controls for internal temperature control, for light (manually switch or dim), for shading or windows (manually move) are available. Cala Touch KNX T CH is complemented with a frame of the switch range used in the building and thus fits seamlessly into the interior design.
Models:
N° 70801 Cala Touch KNX T CH, pure white RAL 9010 with temperature sensor
N° 70803 Cala Touch KNX T CH, jet black RAL 9005 with temperature sensor
Delivery without frame
- Measuring the Temperature with a mixed value calculation. The share of internal measurement value and external value can be set as a percentage
- Threshold values can be adjusted per parameter or via communication objects
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control
- Colour touch display with display and operating pages for
- 1× display of current measured values
- 1× display of bus data (4 universal spaces)
- 1× temperature control (incl. mode change, indication whether heating/cooling active); can also be used as an extension unit for operating another controller
- 3× drive operation (shading, window) with buttons, slider, position display (incl. slat position)
- 3× switching or dimming of light (with percentage display)
- 1× RGB light control
- 1× light color temperature setting
- 1× HCL control (adaption of light color temperature over adjustable periods of time)
- 1× scenes (4 scenes with recall, storage, status indication)
- weekly timer switch with 8 periods
- 2× info page (each displays 2 text objects)
- device settings - Screen saver (clock, clock/indoor/outdoor temperature alternately, off) may be switched on or off
- Key tone may be switched on or off
- 4 inputs for binary contacts or T-NTC temperature sensor.
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- 4 manipulated variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values
- Configuration is made using the KNX software ETS
| Material | Real glass, plastic |
| Display | Visible diagonal: 2.3 inch (59 mm) Resolution: 320 × 240 pixel |
| Colours | • white glass, white housing (pure white RAL 9010) • black glass, black housing (jet black RAL 9005) |
| Assembly | Installation in inlet box |
| Degree of protection | IP 20 |
| Dimensions | approx. 60 × 60 (W × H × D, mm), mounting depth approx. 8 mm |
| Total weight | approx. 70 g (including mounting adapter) |
| Ambient temperature | Operation 0...+55°C, storage -30…+70°C |
| Ambient humidity | max. 5...95% RH, avoid condensation |
| Operating voltage | KNX bus voltage |
| Bus current | max. 18 mA |
| Data output | KNX +/- bus connector terminal |
| Group addresses | max. 2000 |
| Assignments | max. 2000 |
| Communication objects | 379 |
| Inputs | 4× analogue/ digital, max. cable length 10 m. |
| measuring range T-NTC temperature sensor on Cala input | -40°C...+80°C |
| Temperature measuring range | 0…+55°C |
- Housing with display
- Mounting adapter with screws
- Analogue/digital supply line
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss
installation standard
Filter by language:
RTF
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
The Cala Touch KNX T CH room controller for the KNX bus system measures the room temperature. Via the bus, the indoor sensor can receive an external value and process it with its own data to form an overall value (mixed value, e.g. room average). The measured value can be used to control limit-dependent switching outputs. The states can be linked via AND logic gates and OR logic gates. Multifunction modules change input data as required by calculations, querying a condition or converting the data point type. In addition, an integrated actuating value comparator can compare and output values received via communication objects. and output them. Integrated PI controllers control a heating/cooling (according to temperature). Cala Touch KNX T CH has a touch display on which different display and operating pages are shown depending on the individual configuration. A page with display of the current measured values, a menu area for setting the unit and pages with touch controls for internal temperature control, for light (manually switch or dim), for shading or windows (manually move) are available. Cala Touch KNX T CH is complemented with a frame of the switch range used in the building and thus fits seamlessly into the interior design.
Models:
N° 70801 Cala Touch KNX T CH, pure white RAL 9010 with temperature sensor
N° 70803 Cala Touch KNX T CH, jet black RAL 9005 with temperature sensor
Delivery without frame
- Measuring the Temperature with a mixed value calculation. The share of internal measurement value and external value can be set as a percentage
- Threshold values can be adjusted per parameter or via communication objects
- PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control
- Colour touch display with display and operating pages for
- 1× display of current measured values
- 1× display of bus data (4 universal spaces)
- 1× temperature control (incl. mode change, indication whether heating/cooling active); can also be used as an extension unit for operating another controller
- 3× drive operation (shading, window) with buttons, slider, position display (incl. slat position)
- 3× switching or dimming of light (with percentage display)
- 1× RGB light control
- 1× light color temperature setting
- 1× HCL control (adaption of light color temperature over adjustable periods of time)
- 1× scenes (4 scenes with recall, storage, status indication)
- weekly timer switch with 8 periods
- 2× info page (each displays 2 text objects)
- device settings - Screen saver (clock, clock/indoor/outdoor temperature alternately, off) may be switched on or off
- Key tone may be switched on or off
- 4 inputs for binary contacts or T-NTC temperature sensor.
- 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
- 4 manipulated variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
- Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values
- Configuration is made using the KNX software ETS
| Material | Real glass, plastic |
| Display | Visible diagonal: 2.3 inch (59 mm) Resolution: 320 × 240 pixel |
| Colours | • white glass, white housing (pure white RAL 9010) • black glass, black housing (jet black RAL 9005) |
| Assembly | Installation in inlet box |
| Degree of protection | IP 20 |
| Dimensions | approx. 60 × 60 (W × H × D, mm), mounting depth approx. 8 mm |
| Total weight | approx. 70 g (including mounting adapter) |
| Ambient temperature | Operation 0...+55°C, storage -30…+70°C |
| Ambient humidity | max. 5...95% RH, avoid condensation |
| Operating voltage | KNX bus voltage |
| Bus current | max. 18 mA |
| Data output | KNX +/- bus connector terminal |
| Group addresses | max. 2000 |
| Assignments | max. 2000 |
| Communication objects | 379 |
| Inputs | 4× analogue/ digital, max. cable length 10 m. |
| measuring range T-NTC temperature sensor on Cala input | -40°C...+80°C |
| Temperature measuring range | 0…+55°C |
- Housing with display
- Mounting adapter with screws
- Analogue/digital supply line
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
You will need in addition (not supplied):
- Inlet box
- Cover frame (for insert 60 x 60 mm) and mounting plate (77 mm) for swiss
installation standard
Filter by language:
RTF
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages:
Item No.: 70801, 70803, 70813, 70811, 70823, 70821
Languages: