KNX T-L-Pr-UP Touch, pure white RAL 9010
Presence, Brightness and Temperature Sensor
Combined indoor sensor for KNX with temperature sensor, brightness sensor and presence detector. With touch buttons and logic gates
Highlights
-
-
Presence detector with mixed light measurement (daylight and artificial light)
-
-
Integrated room temperature sensor
- - Glass surface with touch buttons
The Sensor KNX T-L-Pr-UP Touchfor the KNX bus system captures the presence of persons even in the event of slight movements, such as sedentary activity in the office. Permanentbrightness monitoring means that the light can be switched off from an adjustable brightness value. Via the bus, the indoor sensor can receive an external temperature measurement and processes it together with its own data to generate an overall temperature (mixed value). The KNX T-L-Pr-UP Touch has a settable brightness limit. The limit output and other communication objects can be connected with an AND and OR logic gate. Two integrated touch buttons (bus buttons) and two red LEDs can be freely assigned bus commands. The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
Nr. 70850 KNX KNX T-L-Pr-UP Touch pure white RAL 9010
Nr: 70852 KNX KNX T-L-Pr-UP Touch deep black RAL 9005
- Brightness measurement Brightness limit value settable by parameter or communication object
- Presence of persons is detected
- Temperature measurements. Mixed value from its own measurement and external values (settable by percentage proportion)
- 2 AND and 2 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 Touch buttons. Bus button, can be configured as switch, toggle, dimmer, for controlling the drives, as 8 or 16-bit encoder for scene call up/storage
- 2 LEDs. Can be configured separately, flash or switch using objects
Configuration is made using the KNX software ETS 5
General: | |
Casing | plastic |
Colours (similar) | RAL 9010 (white) RAL 9005 (black) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71mm × 71mm 10mm |
Total weight | ≈ 50g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 205 |
Assignments max. | 205 |
Communication objects | 86 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 10mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 6s |
Sensors: | |
Detection method Presence Passive infrared method |
PIR |
Presence coverage angle horizontal vertical |
≈ 150° ≈ 35° |
Presence range | ≈ 5 m |
Brightness measurement range | 0 Lux … 20 000 Lux |
Temperature measurement range | -5…+60°C |
- Housing with sensor
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Additionally required (not included in the deliverables):
- Windproof device socket according to DIN EN IEC 60670-1 / DIN 49073
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
Filter by language:
RTF
Item No.: 70850, 70852
Languages:
ZIP
Item No.: 70850, 70852, 70851, 70853
Languages:
Item No.: 70850, 70852
Languages:
The Sensor KNX T-L-Pr-UP Touchfor the KNX bus system captures the presence of persons even in the event of slight movements, such as sedentary activity in the office. Permanentbrightness monitoring means that the light can be switched off from an adjustable brightness value. Via the bus, the indoor sensor can receive an external temperature measurement and processes it together with its own data to generate an overall temperature (mixed value). The KNX T-L-Pr-UP Touch has a settable brightness limit. The limit output and other communication objects can be connected with an AND and OR logic gate. Two integrated touch buttons (bus buttons) and two red LEDs can be freely assigned bus commands. The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
Models:
Nr. 70850 KNX KNX T-L-Pr-UP Touch pure white RAL 9010
Nr: 70852 KNX KNX T-L-Pr-UP Touch deep black RAL 9005
- Brightness measurement Brightness limit value settable by parameter or communication object
- Presence of persons is detected
- Temperature measurements. Mixed value from its own measurement and external values (settable by percentage proportion)
- 2 AND and 2 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
- 2 Touch buttons. Bus button, can be configured as switch, toggle, dimmer, for controlling the drives, as 8 or 16-bit encoder for scene call up/storage
- 2 LEDs. Can be configured separately, flash or switch using objects
Configuration is made using the KNX software ETS 5
General: | |
Casing | plastic |
Colours (similar) | RAL 9010 (white) RAL 9005 (black) |
Degree of protection (after assem-bly) | IP20 |
Size (W × H × D) Supporting ring (W × H) Mounting depth |
55mm × 55mm × 35mm 71mm × 71mm 10mm |
Total weight | ≈ 50g |
Ambient temperature | -5…+45°C |
Ambient humidity (RH) (non-condensing) |
0...95% |
Storage temperature | -25...+70°C |
Overvoltage category | III |
Degree of contamination | 2 |
KNX bus: | |
Medium | TP1-256 |
Configuration mode | S-Mode |
Group addresses max. | 205 |
Assignments max. | 205 |
Communication objects | 86 |
Nominal voltage | 30V DC SELV |
Power consumption | ≤ 10mA |
Connection KNX plug-in terminal Conductor diameter Stripping length |
0.6…0.8mm s 5mm |
Duration after bus voltage restora-tion until data is received | ≈ 6s |
Sensors: | |
Detection method Presence Passive infrared method |
PIR |
Presence coverage angle horizontal vertical |
≈ 150° ≈ 35° |
Presence range | ≈ 5 m |
Brightness measurement range | 0 Lux … 20 000 Lux |
Temperature measurement range | -5…+60°C |
- Housing with sensor
- Supporting ring
- KNX plug-in terminal
- Data sheet with installation instruction German, English, French, Italian, Spanish)
- Manual (German, English, French, Italian, Spanish) as download
- Product file (German, English, French, Italian, Spanish) as download
Additionally required (not included in the deliverables):
- Windproof device socket according to DIN EN IEC 60670-1 / DIN 49073
- Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the building
Filter by language:
Item No.: 70850, 70852
Languages:
Item No.: 70850, 70852
Languages:
Item No.: 70850, 70852
Languages:
Item No.: 70850, 70852
Languages:
Item No.: 70850, 70852
Languages:
RTF
Item No.: 70850, 70852
Languages:
ZIP
Item No.: 70850, 70852, 70851, 70853
Languages:
Item No.: 70850, 70852
Languages: