KNX T-UP gl CH

Temperature sensor and controller

  • Room controller with glass surface
  • Heating control
  • Integrated temperature sensor

The Sensor KNX T-UP gl CH measures the room temperature. The indoor sensor can receive an external measured value via the bus and process it with own data to an overall temperature value (mixed value). The KNX T-UP gl CH provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system. The device is completed with a frame of the switching series installed in the building and thus merges with the interior.

Models:


N° 70635 KNX T-UP gl CH, pure white RAL 9010
N° 70636 KNX T-UP gl CH, jet black RAL 9005

Delivery without frame


  • KNX T-UP gl CH KNX T-UP gl CH
  • KNX T-UP gl CH CH white (70635) KNX T-UP gl CH CH white (70635)
  • KNX T-UP gl CH white (not included in the delivery) KNX T-UP gl CH white (not included in the delivery)
  • KNX T-UP Touch CH black RAL 9005 (70636) KNX T-UP Touch CH black RAL 9005 (70636)
  • KNX T-UP gl CH black with frame (not included in the delivery) KNX T-UP gl CH black with frame (not included in the delivery)
  • Measurement of temperature
  • Mixed values from own measured value and external values (proportions can be set in percentage)
  • PI controller for heating (one or two step) and cooling (one or two step)depending on temperature. Control according to separate target values orbasic target temperature
  • Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
  • 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
  • 2 actuating variable comparators for output of minimum, maximum oraverage values. Each with 5 inputs (for values received via communication objects)
  • Configuration is made using the KNX software ETS 5
Housing Real glass, plastic
Colours similar to RAL 9010 pure white • similar to RAL 9005 jet black
Mounting Installation in inlet box
Protection category IP 20
Dimensions Housing approx. 60 x 60 (W x H, mm), mounting depth approx. 8 mm
Total weight approx. 50 g
Ambient temperature Operation 0…+50°C, storage -10…+60°C
Ambient air humidity max. 95% RH, avoid bedewing
Operating voltage KNX bus voltage
Bus current max. 10 mA
Data output KNX +/- bus terminal plug
Group addresses max. 254
Allocations max. 254
Communication objects 152
Temperature measurement range 0…+50°C