KNX T-L-Pr-UP Touch, pure white RAL 9010

Presence, Brightness and Temperature Sensor

The Sensor KNX T-L-Pr-UP Touch for the KNX building system detects brightness and the presence of persons in the room and measures the temperature. Via the bus, the indoor sensor can receive an external temperature measurement and processes it together with its own data to generate an overall temperature (mixed value).

The KNX T-L-Pr-UP Touch has a settable brightness limit. The limit output and other communication objects can be connected with an AND and OR logic gate. Two integrated touch buttons (bus buttons) and two LEDs can be freely assigned bus commands. The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.

Models

Nr. 70850 KNX KNX T-L-Pr-UP Touch pure white RAL 9010
Nr: 70852 KNX KNX T-L-Pr-UP Touch deep black RAL 9005


  • KNX T-L-Pr-UP Touch KNX T-L-Pr-UP Touch
  • KNX T-L-Pr-UP Touch white (70850) KNX T-L-Pr-UP Touch white (70850)
  • KNX T-L-Pr-UP Touch white lateral view (70850) KNX T-L-Pr-UP Touch white lateral view (70850)
  • KNX T-L-Pr-UP Touch white with frame (not included in the delivery) KNX T-L-Pr-UP Touch white with frame (not included in the delivery)
  • KNX T-L-Pr-UP Touch black lateral view (70852) KNX T-L-Pr-UP Touch black lateral view (70852)
  • KNX T-L-Pr-UP Touch black lateral view (70850) KNX T-L-Pr-UP Touch black lateral view (70850)
  • KNX T-L-Pr-UP Touch black with frame (not included in the delivery) KNX T-L-Pr-UP Touch black with frame (not included in the delivery)
  • Brightness measurement Brightness limit value settable by parameter or communication object
  • Presence of persons is detected
  • Temperature measurements. Mixed value from its own measurement and external values (settable by percentage proportion)
  • 2 AND and 2 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
  • 2 Touch buttons. Bus button, can be configured as switch, toggle, dimmer, for controlling the drives, as 8 or 16-bit encoder for scene call up/storage
  • 2 LEDs. Can be configured separately, flash or switch using objects

Configuration is made using the KNX software ETS 5

HousingABS plastic
Colours• similar to RAL 9010 pure white
• similar to RAL 9005 deep black
AssemblyFlush-mounted (wall installation in junction box
Ø 60 mm, 42 mm deep or cavity wall socket for
burr hole Ø 68 mm)
Protection categoryIP 20
DimensionsHousing approx. 55 x 55 (W x H, mm),
Mounting depth approx. 10 mm,
Base plate approx. 71 x 71 (W x H, mm),
Total weight approx. 50 g
Ambient temperatureOperation -20…+60°C, storage -20…+70°C
Ambient humiditymax. 95% RH, avoid condensation
Operating voltageKNX bus voltage
Bus currentmax. 10 mA
Data outputKNX +/- Bus plug-in terminal
BCU typeOwn microcontroller
PEI type0
Group addressesmax. 205
Allocationsmax. 205
Communication objects86
Temperature measurement range-20…+60°C
Temperature resolution0.1°C
Temperature accuracy± 0.5°C at 0…+50°C
(Note the instructions on Accuracy of the measurement)

Brightness sensor:

Measurement range0 lux … 20,000 lux (higher values may be measured
and displayed)
Resolution1 lux
Accuracy±15% of the measurement value at 100…5,000
lux

Presence sensor:

Recording anglehorizontal approx. 150°
vertical approx. 35° (see also Recording range
of the presence detector)
Rangeapprox. 5 m