KNX TH-UP gl

Temperature/Humidity Sensor

Replacement for 70362-70365

The Sensor KNX TH-UP gl measures the temperature and humidity and calculates the dew point. The sensor can receive external measured values via the bus and process them with the own data to overall values (mixed values, e. g. room average).

The KNX TH-UP gl provides switching outputs with adjustable threshold values. The switching outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects.

Integrated PI controllers allows for control of a ventilation (depending on air humidity) and a heating/cooling system (depending on temperature).

The KNX TH-UP gl can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left.

Models:


N° 70622 KNX TH-UP gl, black
N° 70623 KNX TH-UP gl, pure white

Delivery without frame


  • KNX TH-UP gl (Example with frame) KNX TH-UP gl (Example with frame)
  • KNX TH-UP gl, white (70621) KNX TH-UP gl, white (70621)
  • KNX TH-UP gl, black (70622) KNX TH-UP gl, black (70622)
  • Scheme of installation Scheme of installation
  • Award KNX TH-UP gl Award KNX TH-UP gl
  • Measurement of temperature and air humidity (absolute and relative), calculation of the dew point
  • Mixed values from own measured values and external values (proportions can be set in percentage)
  • PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
  • PI controller for ventilation depending on humidity: dehumidification/humidification (one step) or dehumidification (one or two step)
  • Threshold values can be adjusted per parameter or via communication objects: 3 × temperature, 2 × humidity
  • 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
  • 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
  • Configuration is made using the KNX software ETS 5
Housing ABS plastic material
Colours • similar to RAL 9005 jet black
• similar to RAL 9010 pure white
Mounting In-wall (wall mounting in socket Ø 60 mm, 42 mm deep, resp. cavity wall socket for hole Ø 68 mm)
Protection category IP 20
Dimensions Housing approx. 55 x 55 (W x H, mm),
mounting depth approx. 8 mm,
base plate approx. 71 x 71 (W x H, mm)
Total weight approx. 45 g
Ambient temperature Operation 0…+50°C, storage -10…+60°C
Ambient air humidity max. 95% RH, avoid bedewing
Operating voltage KNX bus voltage
Bus current max. 10 mA
Data output KNX +/- bus terminal plug
Communication objects 158
Temperature measurement range 0…+50°C
Humidity measurement range 0% RH …95% RH