KNX TH-UP basic (discontinued item)

KNX Temperature/Humidity Sensor

Replacement: KNX TH-UP gl.

The Indoor sensor KNX TH-UP basic measures the temperature and air humidity and calculates the dew point. Via the bus, the sensor receives external measuring values and processes them to an overall temperature and air humidity value (composite results) together with its own data.

The KNX TH-UP basic provides six switched outputs whose threshold values can be adjusted. Switched outputs and other communication objects may be linked via AND and OR logic gates. In addition, an integrated control variable comparator compares and outputs variables that were received via communication objects.
Integrated PI-controllers control ventilation (according to humidity) and heating/cooling (according to temperature). The KNX TH-UP basic outputs a warning to the bus as soon as the comfort field (as per DIN 1946) is exited.

The housing is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.

Models:

N° 70362 KNX TH-UP basic, white (discontinued item)


  • KNX TH-UP basic, white (70362) KNX TH-UP basic, white (70362)
  • KNX TH-UP basic, alu (70363) KNX TH-UP basic, alu (70363)
  • KNX TH-UP basic, anthracite (70364) KNX TH-UP basic, anthracite (70364)
  • Measuring the temperature and air humidity (relative and absolute), calculation of the dew point
  • Composite values from own measured values and external values (proportions are adjusted as a percentage)
  • PI-controller for heating (one or two-stage) and cooling (one or two-stage) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
  • PI controller for humidity according to humidity: Dehumidifying/ humidifying (single level) or dehumidifying (single or double level)
  • 6 threshold values can be adjusted per parameter or via communication objects
  • 8 AND and 8 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) are used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
  • 2 control variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
  • Configuration is made using the KNX software ETS
Housing Plastic (partially painted)
Colours • White, glossy (similar to RAL 9016 Traffic White)
• Matt aluminium
• anthracite, matt
• Special colours on request
Assembly Flush mounting (Wall mounting in junction box Ø 60 mm, 42 mm depth)
Protection category IP 20
Dimensions Housing approx. 55 x 55 (W x H, mm),
Mounting depth approx. 15 mm
Baseplate approx. 71 x 71 (W x H, mm),
Total weight approx. 45 g
Ambient temperature Operation -40…+80°C, storage -40…+85°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage KNX bus voltage
Bus current max. 6 mA,
max. 10 mA when programming LED active
Data output KNX +/- bus plug-in terminals
Communication objects 190
Temperature measuring range -40…+80°C
Humidity measuring range 0% RH … 100% RH