MSG1-UP 24V PS

Motor Control Unit for 24V Motor (Polarity Change)

With the Motor control unit MSG1-UP 24 V PS the 24 V DC motor for a shutter, an awning, a blind or window is controlled. The electronic output with polarty change switches silently. An internal power supply transforms the 230 V AC mains voltage into 24 V DC to power the motor.
The device has an input to the central controller, e.g. for time switches, switches or control systems and a manual input for a push-button. Both inputs are fitted with a time automatic for step operation and lock mode.


MSG1-UP 24V PS
  • For a 24 V DC drive
  • Input for central control
  • Input for manual operation
  • The inputs are not locked, i.e. they have the same priority
  • Direction change pause 1 second
  • Integrated power supply transforms the 230 V AC mains voltage into 24 V DC to power the motor
Housing Plastic
Colour White
Assembly Flush mounting (in junction box Ø 60 mm, 60 mm deep)
Protection category IP 20
Dimensions approx. 50 x 50 x 52 (W × H × D, mm)
Weight approx. 80 g
Ambient temperature Operation -20…+50°C, storage -30…+85°C
Ambient humidity 5...80% RH, non-condensing
Operating voltage 230 V AC, 50 Hz
Power consumption Standby: approx. 0.7 W (2.2 VA)
Output 1 × output 24 V DC with polarity changer
for drive Up/Down (+/-/motor).
Load capacity:
at 500 mA up to 60 seconds motor travelling time
at 400 mA up to 150 seconds motor travelling time
at 300 mA up to 320 seconds motor travelling time
Inputs 1× Central command Up/Down.
1× Manual command via present button Up/Down.
Both inputs are binary inputs for potential-free NO contacts.
Maximum line length