Relays
RP-H Dry Contact Relay
The dry contact relay is provided with a change-over contact for “up” and “down” with the help of which you may transfer control commands to other systems.
Functions and Operation:
- Connection without screws by means of tension clamps
Technical Data:
| Mounting | Snap-on fitting on mounting rails |
| Protection category | IP 20 |
| Dimensions | approx. 53 × 90 × 50 (W × H × D, mm), 3 width units |
| Weight | approx. 80 g |
| Ambient temperature | Operation -40…+50°C, storage -55…+90°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Control input | 230 V AC (up/down/N/PE) |
| Outputs | 1 x Up, potential-free, max. 230 V / 8 A 1 x Down, potential-free, max. 230 V / 8 A |
Scope of Delivery:
- Relay for rail mounting
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
RACDC-H AC/DC Relay
The AC/DC Relay RACDC-H switches up to two 24 V DC motors. An external 24 V DC power supply unit is required.
Functions and Operation:
- Connection without screws by means of tension clamps
Technical Data:
| Mounting | Snap-on fitting on mounting rails |
| Protection category | IP 20 |
| Dimensions | approx. 53 × 90 × 50 (W × H × D, mm), 3 width units |
| Weight | approx. 80 g |
| Ambient temperature | Operation -40…+50°C, storage -55…+90°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | 24 V DC |
| Control input | 230 V AC (up/down/N/PE) |
| Outputs | 2 x Motor 24 V DC 1 x Voltage 24 V DC |
Scope of Delivery:
- Relay for rail mounting
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WGGS-2 Group Control Relay
The WGGS-2 allows for operation of up to two drive mechanisms as a group. The built-in type unit is installed in a distribution box, duct or profile.
Technical Data:
| Mounting | Flush mounting |
| Protection category | IP 20 |
| Dimensions | approx. 38 x 47 × 30 (W × H × D, mm) |
| Weight | approx. 55 g |
| Ambient temperature | Operation -20…+70 °C, storage -55…+90°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | 230 V AC, 50 Hz |
| Control input | 230 V AC, 50 Hz (up/down/N/PE) |
| Outputs | 2 × Drive mechanism 230 V AC (up/down/N/PE), 8 A each, a total of max. 500 W |
Scope of Delivery:
- Group control relay with self-adhesive back side
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WGGS-2-AP Group Control Relay
The WGGS-2-AP allows for operation of up to two drive mechanisms as a group.
Technical Data:
| Housing | Plastic material |
| Colour | Grey |
| Mounting | On-wall |
| Protection category | IP 55 |
| Dimensions | approx. 89 x 53 × 89 (W × H × D, mm, without fixing) |
| Weight | approx. 190 g |
| Ambient temperature | Operation -20…+70 °C, storage -55…+90°C |
| Operating voltage | 230 V AC, 50 Hz |
| Control input | 230 V AC, 50 Hz (up/down/N/PE) |
| Outputs | 2 × Drive mechanism 230 V AC (up/down/N/PE), 8 A each, a total of max. 500 W |
Scope of Delivery:
- Group control relay
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WGGS-2-APK Group Control Relay
The WGGS-2-APK allows for operation of up to two drive mechanisms as a group. The group control relay has pre-assembled cabels for connection of the motors (input: STAS3 plug, outputs: STAK3 connectors).
Technical Data:
| Housing | Plastic material |
| Colour | Grey |
| Mounting | On-wall |
| Protection category | IP 55 |
| Dimensions | approx. 89 x 53 × 89 (W × H × D, mm, without fixing) |
| Weight | approx. 405 g |
| Ambient temperature | Operation -20…+70 °C, storage -55…+90°C |
| Operating voltage | 230 V AC, 50 Hz |
| Control input | 230 V AC, 50 Hz (STAS3 plug) |
| Outputs | 2 × Drive mechanism 230 V AC (STAK3 connector), 8 A each, a total of max. 500 W |
Scope of Delivery:
- Group control relay with connection cables (STAS3/STAK3)
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WGGS-4 Group Control Relay
The WGGS-4 allows for operation of up to four drive mechanisms as a group. The relay with housing for surface mounting is installed in a not visible area (e.g. sub distributor, revision hatch).
Technical Data:
| Housing | Plastic material |
| Colour | Grey |
| Mounting | On-wall |
| Protection category | IP 54 |
| Dimensions | 160 × 80 × 57 (W × H × D, mm) |
| Weight | approx. 295 g |
| Ambient temperature | Operation -20…+50°C Storage -55…+90°C |
| Operating voltage | 230 V AC, 50 Hz (up/down/N/PE) |
| Control input | 230 V AC, 50 Hz |
| Outputs | 4 × Drive mechanism 230 V AC (up/down/N/PE), 8 A each, a total of max. 500 W |
Scope of Delivery:
- Group control relay in housing for surface mounting
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WGGS-4-H Group Control Relay
The WGGS-4-H allows for operation of up to four drive mechanisms as a group. Cables are connected without screws by means of tension clamps.
Technical Data:
| Mounting | Snap-on fitting on mounting rails |
| Protection category | IP 20 |
| Dimensions | approx. 88 × 90 × 50 (W × H × D, mm), 5 width units |
| Weight | approx. 140 g |
| Ambient temperature | Operation -40…+50°C Storage -55…+90°C |
| Ambient air humidity | max. 95% RH, avoid bedewing |
| Operating voltage | 230 V AC, 50 Hz |
| Control input | 230 V AC, 50 Hz (up/down/N/PE) |
| Outputs | 4 × Drive mechanism 230 V AC (up/down/N/PE), 8 A each, a total of max. 500 W |
Scope of Delivery:
- Group control relay
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
WG-N-GS-4 Decoupling Relay
The WG-N-GS-4 allows for operation of up to four drive mechanisms as a group. The device has an own mains supply line. The relay with housing for surface mounting is installed in a not visible area (e.g. sub distributor, revision hatch).
Technical Data:
| Housing | Plastic material |
| Colour | Grey |
| Mounting | On-wall |
| Protection category | IP 54 |
| Dimensions | 160 × 80 × 57 (W × H × D, mm) |
| Weight | approx. 300 g |
| Ambient temperature | Operation -20…+50°C Storage -55…+90°C |
| Operating voltage | 230 V AC, 50 Hz |
| Control input | 230 V AC, 50 Hz (up/down/N/PE) |
| Outputs | 4 x Drive mechanism 230 V AC (up/down/N/PE), max. 8 A each, max. 600 W each |
Scope of Delivery:
- Group control relay in housing for surface mounting
- Data sheet with instrallation instruction (English, German, French, Italian or Spanish)
