Solexa 230 V Shading Control
 |  |
The Solexa Shading Control is for opening and retracting an awning or blind dependently of light intensity and room temperature. Outdoor shadings are automatically protected from rain, wind and frost. These alarm functions can be switched off individually. If the blind or awning should not been shut completely by the automatic system setting of customized shading positions is possible. For blinds an additional slat opening angle can be programmed (reversing). A group control relay offers simultaneous control of several drives.
The drive that should be controlled is directly connected to the weather station, what minimizes the effort for cabling. The weather station and the battery-powered operation unit exchange their data and commands via radio. No cable is required for electricity supply or control data inside the building. So no cable needs to be installed in the rooms! Therefor the Solexa Shading Control is an ideal option for retrofitting.
Click on the image to enlargen the picture
Functions and Operation:
- For an awning or a blind (230 V motor), parallel operation of several drives as a group possible (with group control relais). The drive is connected to the weather station
- Radio connection between weather station and control unit
- Control unit with display and keypad and integrated indoor temperature sensor
- Basic setting, adjustment of the automatic functions and manual operation with the control unit
- Rotational direction of the motor and operating direction (whether shading extends from top or from bottom) may be adjusted separately during the basic setting at the control unit
- Shading position for automatic mode can be adjusted (for ex. extend only half the way). Reversing of blinds (slats are tilted so that diffuse light can enter the room)
- Application as a central control possible (Control of IMSG 230 Motor Control Units)
- Enhancement with devices of the System XS possible (radio control of shadings and windows)
- Remote Control Remo 8 available separately
Colours: | ||
|  Aluminium coloured (No. 10130) |  Perl dark grey (No. 10131) |
Technical Data:
| Radio frequency | 868,2 MHz |
| Control unit: | |
| Housing | Plastic material (partly lacquered) |
| Colours | • White matt (similar to RAL 9016 Traffic White) • Aluminium matt brush finished • Pearl dark grey matt brush finished |
| Mounting | On-wall |
| Protection categor | IP 40 |
| Dimensions | approx. 103 × 98 × 28 (W × H × D, mm) |
| Total weight | approx. 170 g (including batteries) |
| Ambient temperature | Operation 0…+50°C, storage -10…+50°C |
| Ambient air humidity | max. 80% RH, avoid bedewing |
| Operating voltage | 2 x 1.5 V (2 batteries, AA/Mignon/LR6) or 2 x 1.2 V (2 rechargeable batteries, AA/Mignon/LR6) |
| Weather station: | |
| Housing | Plastic material |
| Colour | White / translucent |
| Mounting | On-wall |
| Protection category | IP 44 |
| Dimensions | approx. 96 × 77 × 118 (W × H × D, mm) |
| Weight | approx. 260 g |
| Ambient temperature | Operation -30…+60°C, storage -30…+70°C |
| Operating voltage | 230 V AC, 50 Hz |
| Current | max. 22 mA |
| Power consumption | max. 10 W, Stand-by approx. 4 W |
| Output | 1 x 230 V drive mechanism (up/down/N/PE), can carry up to 1000 W, fused with mircro fuse T 6.3 A |
| Heating rain sensor | approx. 1.2 W |
| Measurement range temperature sensor | -40…+80°C |
| Measurement range wind sensor | 0…35 m/s |
| Measurement range brightness sensor | 0…150 klux |
Scope of Delivery:
- Control unit for display of weather data, alarm messages and operational mode; with integrated keys; with integrated indoor temperature sensor
- 2 batteries 1.5 V
- Weather station for report of outdoor temperature, wind speed, precipitation and brightness; with combined mounting bracket for wall or pole mounting
- Manual (German, English, French, Italian or Dutch)
Accessories:
- Remote Control and Push Buttons for manual operation
- WGGS and WG-N-GS Group Control Relays for parallel operation of several drives without integrated group control relay as a group
- IMSG 230 Motor Control Unit for connection of several drives, with separate pushbuttons for manual operation
- Motor control units and control units of the System XS for enhancement (control of shadings and windows)
- Cable Set for simplified installation, consisting of mains cable with shock-proof plug and cable for drive connection with STAK 3 connector; available pre-assembled or descrete
- Hinge Arm Mounting for flexible wall, pole or beam mounting of weather stations
