WS1000 Color Control System
With Colour Touch Display
 |  |  |  |  |  |  |  |  |  |  |  |
Apart from shading and ventilation the WS1000 Color also controls heatings and air conditioners. Motion and smoke detectors offer more safety and illumination at dawn creates atmospheric lighting.
Alongside the operating panel, the WS1000 Color provides a weather station and a radio-controlled indoor sensor. The indoor sensor is integrated in the switching series used in the building and perfectly merges with the interior.Various climate zones can be realised by installation of additional indoor sensors (single room control).
The touch display makes operation of the WS1000 Color exceptionally easy and comfortable. The user interface was designed according to evolutionary-biological findings. A simple touch on the display buttons sets the function and moves the drives. In passive state the current weather is displayed: the sun travelling through the sky, rain or snow.
Functions and Operation:
- Animated graphical colour display (8.4 inches) with touch function: Easy operation without additional keys. The screen is easy to read, even in daylight. Designer housing in a floating appearance
- In Idle mode, the screen can either display current weather data or be switched off or dimmed. Dimming the display saves energy and does not interfere with the ambience of the room
- Adjustable display language (English, German, French, Italian)
- 4, 6, 8 or 10 drive outputs (dependent on model), ), available for 230 V drives or potential-free. For awnings, blinds, roller shutters, windows and sliding doors. Optional connection of multiple drives in a group (group control relay)
- Centralised control of multiple drives in a drive group using the IMSG 230 Motor Control Unit. The individual motors can also be separately manually operated using additional hand buttons
- Automatic slat angle adjustment on blinds: The slats can be positioned in accordance with the position of the sun, so that as much light as possible enters the room at all times without exposing it to direct sunlight. To achieve this, the control system calculates the position of the sun based on the location, date and time
- “Slat Turning” and “Canvas Tightening” functions for blinds and awnings respectively (adjustments to correct positioning after a movement are required for certain shade motors)
- 4 multifunctional outputs for heating, cooling, supply air, alarm systems, lighting, gutter heating or dimmers
- 4 multifunctional inputs for motion detectors, smoke detectors, climate control detectors (status of independent heating/cooling), closed-contacts (for sliding doors) or triggers for automatic resets
- A motion detector alarm will close the windows. A smoke alarm retracts the shades (escape routes) and starts ventilation (smoke extraction)
- 32 wireless channels for WGTH-UP Indoor Sensors, Elsner Elektronik ventilation units, RF Relays, RF Motor Control Units, Remo 8 remote control
- Connection of 10 external manual push-buttons
- All connected drives and devices can be operated manually with the Remo 8 Remote Control (available separately)
- Weather station with advanced sensor technology: Electronic measurement of wind speed (free of wear and tear, no storm or hail damage), precipitation detection via heated sensor (no false measurements in dew or fog), light brightness measurement and twilight detection using special filters
- The limit value for the detection of “twilight” can be set (e.g. for lights and for blinds for privacy)
- Radio-controlled indoor sensor for measurement of temperature and air humidity. Wireless data transfer to central unit. Voltage supply via cable (e. g. from central unit) or with battery
- All drives and units can be individually named (e.g. “Blind East”)
- After manual operation, automatic resets set the drives and devices back into automatic mode. A time lag (e.g. 20 minutes after manual operation) or a fixed time point (e.g. at 3am) can be set. The resets can be activated separately for each drive group
- The Settings menu can be protected with an access code against unauthorised changes
- The function of the arrow keys can be adapted to the actual movement direction (manual direction), e. g. for blinds that extend from the bottom upwards
- The direction of rotation of connected drives can be corrected in the control system menu
Colours of housing: | |
|  Alu / graphite |
Technical Data:
| Central Unit: | |
| Housing | Plastic (partially painted) |
| Colours | • White glossy (similar to RAL 9003 Signal White) / light grey (similar to RAL 7035 Ligh Grey) • Aluminium (similar to RAL 9006 White Aluminium) / graphite (similar to RAL 7024 Graphite Grey) |
| Mounting | Flush / cavity wall |
| Protection category | IP 40 |
| Dimensions | Central Unit approx. 250 × 182 × 43 (W × H × D, mm), concealed box approx. 235 × 169 × 62 (W × H × D, mm) |
| Total weight | approx. 1630-1750 g (dependent on model) |
| Ambient temperature | Operation 0…+50°C, storage -20…+70°C, avoid condensation |
| Operating voltage | 230 V AC, 50 Hz |
| Indoor Sensor: | |
| Housing | Plastic (partly pained) |
| Colour | Matched on the colour of the control (White glossy or Aluminium matt) |
| Mounting | In-wall (in socket Ø 60 mm, 42 mm deep) |
| Protection category | IP 20 |
| Dimensions | Housing approx. 55 × 55 (W × H, mm), mounting depth approx. 15 mm, base plate approx. 71 × 71 (W × H, mm) |
| Total weight | approx. 50 g |
| Ambient temperature | Operation -20…+70°C, storage -55…+90°C |
| Ambient air humidity | max. 80% RH, avoid bedewing |
| Operating voltage | 7…30 V DC |
| Current | max. 35 mA |
| Data output | Via radio |
| Radio frequency | 868.2 MHz |
| Measurement range temperature | -40…+100°C |
| Measurement range humidity | 0…100% RH |
| Weather Station: | |
| Housing | Plastic |
| Colour | White / translucent |
| Mounting | Surface-mounted |
| Protection category | IP 44 |
| Dimensions | approx. 96 × 77 × 118 (W × H × D, mm) |
| Weight | approx. 160 g |
| Ambient temperature | Operation -30…+50°C, storage -30…+70°C |
| Operating voltage | 24 V DC |
| Current | max. 150 mA |
| Power consumption | max. 3.6 W, Stand-by approx. 2 W |
| Heating rain sensor | approx. 1.2 W |
| Measurement range temperature | -40…+80°C |
| Measurement range wind | 0…35 m/s |
| Measurement range brightness | 0…99 000 lux |
Scope of Delivery:
- WS1000 Color central unit with 4, 6, 8 or 10 drive outputs (Models WS1000 Color-4 to WS1000 Color-10)
- Indoor Sensor WGTH-UP (room temperature, air humidity) with frame. You will need a socket Ø 60 mm, 42 mm deep in addition (not supplied)
- Weather Station for report of outdoor temperature, wind speed, precipitation and brightness; integrated GPS receiver; with combined mounting bracket for wall or pole mounting
- Manual (German). Manual English, French or Italian on request
- Stylus
Accessories:
- Remote Control and Push Buttons for manual operation
- WGTH-UP Indoor Sensor. Additional indoor sensor, e. g. to realise areas with different room conditions in a conservatory
- RF Relay wireless relay, for example for connection of light and gutter heating (on/off)
- RF-MSG Wireless Motor Control Unit, for example for connection of shades and windows (up/down)
- WGGS and WG-N-GS Group Control Relays for parallel operation of several drives without integrated group control relay at one drive group
- IMSG 230 Motor Control Unit for connection of several drives at one drive group, with separate pushbuttons for manual operation
- Hinge Arm Mounting for flexible wall, pole or beam mounting of the weather station
