KNX T-AP Temperature
Temperature Sensor | Thermometer
Extended version from January 2010 (ETS application 2.0)
Extended version from January 2010 (ETS application 2.0)
 |  |
The Temperature Sensor KNX T-AP measures temperature in indoor and outdoor areas. The sensor can receive an external measured value via the bus and process it with the own data to an overall temperature (mixed value).
The KNX T-AP provides four switching outputs with adjustable threshold values as well as additional AND and OR logic gates. The sensor has got a PI controller for heating and cooling.
Functions and Operation:
- Measurement of temperature
- Mixed value from own measured value and external value (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step)
- 4 switching outputs with adjustable threshold values (Threshold values can be set by parameter or via communication objects)
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs (in the form of communication objects) may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is accomplished by means of the KNX software ETS
Technical Data:
| Housing | Plastic material, sensor sleeve metal |
| Colour | Grey |
| Mounting | On-wall |
| Protection category | IP 65 |
| Dimensions | approx. 65 x 93 x 38 (W x H x D, mm) |
| Weight | approx. 70 g |
| Ambient temperature | Operation -30…+85°C, storage -55…+125°C |
| Operating voltage | KNX bus voltage |
| Bus current | max. 5.5 mA, max. 15 mA when programming LED is active |
| Communication objects | 80 |
| Measurement range | -40…+80°C |
Scope of Delivery:
- Sensor in housing for surface mounting
- Data sheet with installation instruction (German or English)
- Product file VD2 (German, English) as download
